Jump to content

We welcome modern classics from the 80's, 90's and on-wards, from saloons and hatchbacks to sports cars.
Join Now

Reviews

Check out our reviews of modern classic cars. We give them ratings so you can choose your car wisely.

Members Cars

Check out our members cars and add your own

Mk1 Mazda MX5 (aka Mindy!)

This is the latest addition to our modern classic family! A Mk1 Mazda MX5 1.6 (UK car). I've wanted one of these since the day they were launched back in 1989. Was at the Car show in Glasgow seeing all the new cars, when they pulled the cover off to reveal this gorgeous little red sports car. Was love at first sight, and said there an then I have to have one of these one day! Only taken me nigh on 30 years to realize that dream, but I was a skint teenager back then (now I'm a skint oldie! lol).
As I've been down lately, Gayle my Mrs suggested I needed a new project to help pick me up. She also loves the mx5's, so initial plan was to get a total rust bucket without mot and do a full restoration. After looking at prospective cars, realized that the £1000 budget really did just buy cars that were totally gone. So we upped the budget and came up with plan B! This plan was to buy a decent enough car to start with that just needed TLC, so we spent ages viewing lots of cars that appeared decent but once we arrived to view found they too needed too much work rust wise. Finally found this one which was in Stirling.
So, she's a 1997 UK car (so one of the last mk1's) with 90K on the clock, came with almost a years mot and the chap selling really didn't want to sell her! As everyone knows, all MX5's rot in the rear inner/outer sills and the rear arches. Mindy still has her original arches, but has had the very lower outer sills replaced on both sides. Not the prettiest repair, but look to be a very solid one. Underneath she's solid, and the previous owner has spent a fair bit on her with the welding and also replacing both rear brake calipers. There wasn't a service book which was disappointing, but there are receipts and old MOT's so some history of what she's had done.
Faults we noticed that needed dealing with first were the hood. It was completely shot, and had temp gaffa tape repairs. There was also a really bad vibration when at 65-70mph. These repairs are detailed in later posts.
So here she is the day we arrived home!

We'd literally just arrived home 5 mins before, and I thought I'd get a couple of pics but as I did, Gayle and my step daughter promptly jumped in and off they went for a wee run!! lol
My plan is to restore her to as close to new as I can get, along with some subtle mods. So planning the following:
Replace all suspension including shocks/springs, all wishbones etc then laser 4 wheel alignment Stainless steel exhaust Replace hood fully strip underneath and apply new underseal plus having chassis wax injected. New brakes Rear sills to be replaced by BorderMX5 so done professionally and will be undetactable once done Full respray (in either the original classic red or possibly the new Mazda "Soul red" metallic red.) Custom leather Interior retrim including replacing the seats with tombstone ones New wheels and tyres (Cades Enos with a bit of dish) Fully detailed engine bay Follow her progress in "Members Cars" in the forum.
Read more...
News Flash!
  • COMPETITION TIME!.......WIN a FREE Sonus Bluetooth hands free/MP3 player
  • CHANGE TO MEMBERS CARS SECTION. Please see Latest News

Search the Community

Showing results for tags 'mk1'.



More search options

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Categories

  • Articles
  • Saloons
  • Hatchbacks and Estates
  • Sports cars
  • 4 x 4's and SUV'S
  • Vans

Forums

  • Site Stuff
    • Latest Club news
  • General
    • Newbies
    • Chat Central
    • Members Cars
    • Garage
    • Meets & Events
  • Premium Members area
    • Competitions (Premium Members only)
    • Lounge (Premium Members only)
    • Photos/videos (Premium Members only)
  • Technical
    • S.O.S - Help!
    • DIY Guides
  • Classifieds
    • For Sale
    • Wanted
  • Sponsors section
    • Adrian Flux Insurance
    • Sponsor 2
    • Sponsor 3

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


Name


Location


Car Make and model

Found 3 results

  1. This is the latest addition to our modern classic family! A Mk1 Mazda MX5 1.6 (UK car). I've wanted one of these since the day they were launched back in 1989. Was at the Car show in Glasgow seeing all the new cars, when they pulled the cover off to reveal this gorgeous little red sports car. Was love at first sight, and said there an then I have to have one of these one day! Only taken me nigh on 30 years to realize that dream, but I was a skint teenager back then (now I'm a skint oldie! lol). As I've been down lately, Gayle my Mrs suggested I needed a new project to help pick me up. She also loves the mx5's, so initial plan was to get a total rust bucket without mot and do a full restoration. After looking at prospective cars, realized that the £1000 budget really did just buy cars that were totally gone. So we upped the budget and came up with plan B! This plan was to buy a decent enough car to start with that just needed TLC, so we spent ages viewing lots of cars that appeared decent but once we arrived to view found they too needed too much work rust wise. Finally found this one which was in Stirling. So, she's a 1997 UK car (so one of the last mk1's) with 90K on the clock, came with almost a years mot and the chap selling really didn't want to sell her! As everyone knows, all MX5's rot in the rear inner/outer sills and the rear arches. Mindy still has her original arches, but has had the very lower outer sills replaced on both sides. Not the prettiest repair, but look to be a very solid one. Underneath she's solid, and the previous owner has spent a fair bit on her with the welding and also replacing both rear brake calipers. There wasn't a service book which was disappointing, but there are receipts and old MOT's so some history of what she's had done. Faults we noticed that needed dealing with first were the hood. It was completely shot, and had temp gaffa tape repairs. There was also a really bad vibration when at 65-70mph. These repairs are detailed in later posts. So here she is the day we arrived home! We'd literally just arrived home 5 mins before, and I thought I'd get a couple of pics but as I did, Gayle and my step daughter promptly jumped in and off they went for a wee run!! lol My plan is to restore her to as close to new as I can get, along with some subtle mods. So planning the following: Replace all suspension including shocks/springs, all wishbones etc then laser 4 wheel alignment Stainless steel exhaust Replace hood fully strip underneath and apply new underseal plus having chassis wax injected. New brakes Rear sills to be replaced by BorderMX5 so done professionally and will be undetactable once done Full respray (in either the original classic red or possibly the new Mazda "Soul red" metallic red.) Custom leather Interior retrim including replacing the seats with tombstone ones New wheels and tyres (Cades Enos with a bit of dish) Fully detailed engine bay Follow her progress in "Members Cars" in the forum. View full record
  2. Dave

    Mk1 Mazda MX5 (aka Mindy!)

    This is the latest addition to our modern classic family! A Mk1 Mazda MX5 1.6 (UK car). I've wanted one of these since the day they were launched back in 1989. Was at the Car show in Glasgow seeing all the new cars, when they pulled the cover off to reveal this gorgeous little red sports car. Was love at first sight, and said there an then I have to have one of these one day! Only taken me nigh on 30 years to realize that dream, but I was a skint teenager back then (now I'm a skint oldie! lol). As I've been down lately, Gayle my Mrs suggested I needed a new project to help pick me up. She also loves the mx5's, so initial plan was to get a total rust bucket without mot and do a full restoration. After looking at prospective cars, realized that the £1000 budget really did just buy cars that were totally gone. So we upped the budget and came up with plan B! This plan was to buy a decent enough car to start with that just needed TLC, so we spent ages viewing lots of cars that appeared decent but once we arrived to view found they too needed too much work rust wise. Finally found this one which was in Stirling. So, she's a 1997 UK car (so one of the last mk1's) with 90K on the clock, came with almost a years mot and the chap selling really didn't want to sell her! As everyone knows, all MX5's rot in the rear inner/outer sills and the rear arches. Mindy still has her original arches, but has had the very lower outer sills replaced on both sides. Not the prettiest repair, but look to be a very solid one. Underneath she's solid, and the previous owner has spent a fair bit on her with the welding and also replacing both rear brake calipers. There wasn't a service book which was disappointing, but there are receipts and old MOT's so some history of what she's had done. Faults we noticed that needed dealing with first were the hood. It was completely shot, and had temp gaffa tape repairs. There was also a really bad vibration when at 65-70mph. These repairs are detailed in later posts. So here she is the day we arrived home! We'd literally just arrived home 5 mins before, and I thought I'd get a couple of pics but as I did, Gayle and my step daughter promptly jumped in and off they went for a wee run!! lol My plan is to restore her to as close to new as I can get, along with some subtle mods. So planning the following: Replace all suspension including shocks/springs, all wishbones etc then laser 4 wheel alignment Stainless steel exhaust Replace hood fully strip underneath and apply new underseal plus having chassis wax injected. New brakes Rear sills to be replaced by BorderMX5 so done professionally and will be undetactable once done Full respray (in either the original classic red or possibly the new Mazda "Soul red" metallic red.) Custom leather Interior retrim including replacing the seats with tombstone ones New wheels and tyres (Cades Enos with a bit of dish) Fully detailed engine bay Follow her progress in "Members Cars" in the forum.
  3. How do folks! Looks like we'll be adding to our list of current cars! So far we have a 2008 MINI Cooper, 2008 Ford Focus and a 1999 Honda Civic Aerodeck. Lately my heads been in a bit of a dark place through pressures from work etc and I've been a bit down to say the least. Gayle (my mrs) suggested that I need a project to work on to help lift my spirits a bit, and suggested I get the one car I've always wanted since they were launched.......a mark 1 Mazda MX5! I was at the car show in Glasgow secc when they did an unveiling of them back in 89/90 and the second the cover came off I fell in love with this cool looking little red sports car! For something so new it looked so retro (well, the design was inspired by the 1960's Lotus Elan)! So been trying to decide what way to go, whether a full on restoration of a basket case or go for one with a solid base to start with. Looking at the price of non mot'd rusty ones, we quickly decided to try and get one that was mot'd and as rust free as possible. This would also make it easier to get it home! So, went to look at one yesterday in Berwick - upon Tweed, but it had been badly bodged so would have spent more time redoing bad repairs. It had also apparently passed it's mot 3 days earlier, with plates welded on one sill that were coming off! Oh, and the battery was just loose in the boot, no bracket....but worst of all zero brakes! Only found that out on the test drive! So we walked away from it, as it was what I would call "gubbed"! Have spotted another for sale in a garage, so hoping we'll go and see this one soon. A nice limited edition one this time, but looks really nice condition. (mind you, the last one looked good in the photos so I'll reserve judgement! One things for sure, we are deffo getting one, just a matter of finding the right one at the right price. Plan is to slowly replace suspension, brakes, and any other bits as we go along and bring it up to show standard. I still have the aerodeck to work on at some point but it's taking a back seat for a while. Will let you all know how we get on and will get a project page going as soon as we get it! Dave
×

Important Information

By using this site, you agree to our Terms of UseGuidelines..